CÔNG TY CỔ PHẦN MÔI TRƯỜNG GIA CÁT

GIA CAT ENVIRONMENT JSC

MST: 3502183539
Điện thoại: 0254 3848.787 - Fax: 0254 3848.797
Director : 0906.163.248
giacatvt@gmail.com / info@giacatvietnam.com
Sales Manager: 0908.916.376
jessica.ta@vnn.vn
Số 175 Phạm Hồng Thái, phường 07, Vũng Tàu
Tìm kiếm

Needles - Chisel Tip
Ngày đăng: 07/11/2016 06:58:51 PM


ConsumablePart NumberDescription
Needles - Chisel TipChipping Hammers196.2113Kit supplied with the Challenger Needle Scaler fitted with 3mm needles together with a chisel holder, an anvil and a 3/4'' blade chisel to enable the tool to be converted to the chisel scaler model
Needles - Chisel TipChisel704.3101Vibro-Lo™ Chisel 1/2'' Square x 3/4''
Needles - Chisel TipChisel704.3103Wide flat chisel for the removal of peeling paint and rust, Vibro-Lo™
Needles - Chisel TipChisel704.1106Mortar removal for re-pointing brickwork.
Needles - Chisel TipChisel704.3107Flat chisel for weld spatter and sand cast cleaning, Vibro-Lo™
Needles - Chisel TipChisel704.3110Spark resistant Aluminium Bronze for use in hazardous areas, Vibro-Lo™Needles - Chisel Tip
Needles - Chisel TipChisel704.1112Concrete chipping.
Needles - Chisel TipChisel704.3205Weld flux and thick coating removal, Vibro-Lo™
Needles - Chisel TipNeedles - Chisel Tip413.21126 sets x 12 3mm - These needles will clean the same materials as a pointed tip, but will leave a light surface marking.
Needles - Chisel TipNeedles - Flat Tip412.11296 sets x 12 3mm - The flat tips needles will reduce marking on metal surfaces and can actually give a polishing effect. For use on thin gauge metals and any surface where a light treatment is required. 2mm needle used on a welded joint produces a similar effect to shot peening, reducing stress in the weld.
Needles - Chisel TipNeedles - Pointed Tip413.31126 sets x 12 3mm - Sharpened to a conical point, these are the most effective in breaking through very hard scale on materials where some surface indentation is permissible - or where roughening or keying the surface is actually desirable.
Needles - Chisel TipNeedles - Spark Resistant403.131212 x 3mm - Available in 3mm flat tip only for use in hazardous areas.Needles - Chisel Tip
Needles - Chisel TipNeedles - Stainless Steel453.1207100 x 3mm - Available in 3mm flat tip only, to be used in applications such as refurbishment of food processing areas of high humidity where the corrosive effect on needles would be prohibitive. Used on decorative concrete surfaces where contamination of the surface from carbon steel is undesirable